2. Remove the engine wiring harness clamp A.
3. Disconnect the brake booster vacuum hose A from the brake booster B.
4. Remove pin A and connecting pin B.
5. Unscrew the nuts securing the vacuum booster C.
6. Pull brake booster A forward.
Note: When reassembling, be careful not to damage the amplifier body or the threads on the amplifier mounting studs.
Note: Be careful not to damage or bend the brake lines or other hoses and wires.
7. Rotate the brake booster forward and remove the engine compartment.
8. Install the power steering in the reverse order of removal.
Note: Always use a new locking pin.
Install the brake master cylinder after installing the brake booster.
Check the brake pedal height and free travel. Make adjustments if necessary.
Bleed the brake system.
[You will find the original on the portal: HondaBook.ru]