Interior (interior elements of the cabin) of the car Honda Civic 7

Instrument panel
Removal and installation Note: Installation is carried out in the reverse order of removal. 1. Disconnect the cable from the negative terminal of the battery. 2. Remove the lower panel from the driver's side. 3. Remove...

Removal and installation of instrument cluster elements
Note: Installation is carried out in the reverse order of removal. Instrument cluster panel trim 1. Lower the steering column down. 2. Remove the upper part of the steering column cover. 3. Remove the instrument cluster...

Removal and installation instrument cluster components — lower panel
From the driver's side 1. Turn the handle 90°. 2. Gently pull the right side of the bottom panel and disconnect the clips. 3. Pull the bottom panel towards you, release the clips and remove it. From the passenger side...

Removal and installation instrument cluster components — lower cover
1. Turn the handle 45°. 2. Carefully pull the bottom cover towards you and detach the retainer. 3. Pull the cover and detach it from the retainer. Sedan. Hatchback.

Lower instrument panel trim (sedan)
1. Raise the steering column up. 2. Turn the handles 45°. 3. Carefully pull the bottom cover down and release the clips. 4. Pull the bottom cover towards you, release the clips and remove it.

Additional storage compartment
1. Remove the lower cover from the driver's side. 2. Loosen the screws. 3. Pull the bottom edge of the additional storage compartment and release the clips. 4. (Hatchback) Loosen the screws and remove the additional...

Central lower instrument panel trim
1. Remove the ashtray and unscrew the screw. 2. (Sedan) Gently pull the trim and release the clips. 3. (Sedan) Disconnect the connectors and then remove the center lower instrument panel trim. 4. (Hatchback) Remove the...

Finishing the hole of the manual transmission lever or automatic transmission selector (hatchback)
1. Remove the glove box. 2. (Models with manual transmission) Remove the gear shift knob. 3. Using a wrench wrapped in a cloth, carefully release the clips and clamps through the open glove compartment door as shown in...

Central instrument panel trim
Hatchback 1. Remove the lower panel on the driver and passenger side. 2. Remove the glove box. 3. Remove the gearshift lever hole trim. 4. (Manual air conditioner) Disconnect the air flow mixing drive cable (A) and the...

Glove box
1. Remove the lower panel on the passenger side. 2. Before removing the glove box, it is necessary to detach the stoppers as shown in the figure. 3. Loosen the bolts and then remove the glove box. Tightening torque - 5...

Side deflector grille
Hatchback 1. Remove the instrument panel. 2. Remove the instrument panel amplifier. 3. Loosen the screws and remove the air duct. 4. Loosen the screws and then remove the side deflector grille. Sedan 1. Using a...

Removal and installation instrument cluster elements — cup holder (hatchback)
1. Remove the instrument panel. 2. Loosen the screws, then remove the cup holder.

Removal and installation of instrument cluster elements — tray (hatchback)
From the driver's side 1. Remove the instrument panel. 2. Remove the cup holder. 3. Loosen the screws, then remove the tray. From the passenger side 1. Remove the instrument panel. 2. Remove the instrument panel...

Instrument cluster amplifier
1. Remove the instrument panel. 2. Remove the following parts: (sedan) central instrument panel trim; instrument cluster panel trim; (hatchback) additional storage compartment; (automatic air conditioner) sunlight...

Removal and installation the center console (sedan)
1. Disengage the clips, pull up the center console trim and remove the trim. 2. (Models with manual transmission) Remove the gear shift knob. 3. Loosen the screws and disconnect the "C" clips. Then remove the center...

Interior trim
Removal and installation 1. When removing the interior trim, refer to the assembly drawing "Interior trim". 2. Installation is carried out in the reverse order of removal. Interior trim (sedan). 1 - upper seat belt...

Roof finishing
Removal and installation Note: When removing the roof trim, refer to the assembly drawing "Roof Trim". 1. Remove the front pillar trim (see section " Interior trim "). 2. Remove the upper center pillar trim (see section...

Floor finishing
Removal and installation 1. Remove the front seats (see section " Seats "). 2. Remove the rear seat cushion (see section " Seats "). 3. (Sedan) Remove the rear seat back side support (see section " Seats "). 4. Remove...

Seat belts
Removal and installation Front seat belts Warning: If the front seat belts are not handled correctly, the seat belt pretensioner may accidentally activate and injure you (see chapter " Operating manual "). Caution: Do...

Front seats
1. (Some models) Before carrying out any work, make sure that you know the access code for the radio. After disconnecting the battery terminal, the radio is blocked and can only be unlocked by entering the code. 2....

Back seat
1. When removing the rear seat, refer to the assembly drawing "Rear seat". 2. Installation is carried out in the reverse order of removal. Rear seat (sedan). 1 - bolt (models with armrest), 2, 4 - clamp, 3 - rear seat...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Link in different formats to this section

TEXTHTMLBB Code

Civic 8 (2005-2011)

Civic 7 (2000-2005)