2. Remove the air cleaner assembly (A).
3. Release the master cylinder brake pipes (A) from the clamps.
4. Disconnect the vacuum hose (B) from the brake booster.
5. Remove the cotter pin (A), unscrew the pivot bolt (B) and disconnect the fork from the brake pedal.
6. Remove the mounting nuts (C) from the brake booster.
7. Remove the brake booster (A) from the engine compartment.
Warning:
- Do not damage the surfaces and threads of the amplifier studs.
- Do not bend or damage the brake lines.
8. The brake booster is installed in the reverse order of removal, taking into account the following:
- Before installing the brake booster, check the clearance of the push rod.
- When installing, install a new cotter pin.
- After installing the brake booster and master cylinder, fill the reservoir with fresh brake fluid, bleed the brake system, and adjust the height and free play of the brake pedal.