Automatic transmission specifications Damper cable (carburetor models) distance x (between cable end and lock nut A) - 86 mm free travel of the lever - 2-4 mm Tightening torques for threaded connections (N·m) Bolts for fastening the drive clutch to the...
Troubleshooting Note: Poor performance of an automatic transmission can be mainly caused by five reasons: poor engine performance, poor adjustments, hydraulic failures, mechanical failures, and computer malfunctions. Diagnostics should...
Throttle valve cable — adjustment Engines with carburetor 1. Remove the air filter housing ( see chapter 4 ). 2. Disconnect a cable from an arm and the lever of a drive of a throttle. Pic. 3.2 Throttle cable Bracket adjustment 3. Before adjusting the...
Shift cable — removal, installation and adjustment Withdrawal 1. Move the control lever to neutral position, raise the vehicle and place it on stands. 2. Remove the protection of the engine compartment. 3. Remove the front of the exhaust pipe ( see chapter 4 ). 4....
Neutral key — check and change 1. Start the engine at each position of the gearbox mode selector lever. The starter should only engage in positions P or N. If the starter does not engage or engages in lever positions other than P or N, check that the...
Switch lever — removal and installation 1. Remove the center console ( see chapter 11 ). 2. Turn away screws of fastening of the handle and remove it. Pic. 6.2 Assembling the shift lever: 1 - button; 2 - handle; 3 - screw; 4 - lever position indicator; 5 -...
Automatic transmission — removal and installation Withdrawal 1. Disconnect the cables from the battery and remove it. this will greatly facilitate your work in the future. 2. Remove the air filter housing and its hoses 3. Remove the distributor ( see chapter 5 ). 4....