Doors — replacing external handle Note: raise the glass all the way 1. Remove: Door panel. Plastic cover. 2. Remove the screws. 3. Slide the latch down and remove the bolts 4. Pull out the outside handle. Pull the link arm out of the joint using wire...
Replacing glass/window regulator 1. Remove: Door panel. Plastic cover. 2. Carefully move the glass until you can see the bolts, then loosen them. Pull out the guide, remove the glass from the guide and carefully pull the glass through the window slot....
Center console Replacement Disassembly is carried out in the specified order. Installation is carried out in the reverse order of disassembly. Note: If necessary, replace damaged clamps. Make sure that the wiring harnesses are not...
Dashboard Removing and installing components Caution: When using a flathead screwdriver as a lever, apply protective tape around the parts being removed. Note: Be careful not to damage the instrument panel or parts being removed....
Removing the airbag SRS parts are located in this area. Review the location of SRS parts, safety precautions, and work procedures before performing any repairs or maintenance. Note: You will need an assistant when installing and removing...
Front bumper Replacement Installation is carried out in the reverse order of collapse. Note: Make sure the front bumper does not touch the side reinforcement. If necessary, adjust the gap. Disassembly
Rear bumper Replacement Note: 4D models shown, disassembly procedures for 3D models are the same. Installation is carried out in the reverse order of removal. Note: If necessary, replace damaged clamps Make sure the rear bumper is...