Contents: Checking the oil level ⇊ Oil change ⇊
Checking the oil level
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the filler plug (A) and remove the gasket (B).
3. Make sure that the oil level (C) is level with the lower edge of the filler hole.
If necessary, top up the gearbox oil level to the specified level.
Oil - Honda MTF-II
4. Install a new gasket and tighten the filler plug.
Tightening torque - 44 Nm
Oil change
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the filler plug and remove the gasket.
Location of components in the engine compartment. 1 - dipstick for automatic transmission fluid level, 2 - clutch fluid reservoir (models with manual transmission), 3 - brake fluid reservoir, 4 - air filter, 5 - engine oil level dipstick, 6 - oil filler neck, 7 - accessory drive belt, 8 - windshield washer reservoir, 9 - air conditioning service window, 10 - engine cooling system expansion tank, 11 - variator working fluid level dipstick, 12 - radiator cap, 13 - battery.
SLT.
3. Unscrew the drain plug and remove the gasket.
4. Drain the oil from the gearbox into a container.
5. Install a new gasket and tighten the drain plug.
Tightening torque - 39 Nm
6. Fill the gearbox with oil.
Oil - Honda MTF-II
Filling capacity:
sLW box:
- when replacing - 1.5 l
- full volume - 1.6 l
sLT box:
- when replacing - 1.7 l
- full volume - 2.1 l
7. Make sure that the gearbox oil level is at the lower edge of the filler hole. If necessary, top up the oil level to the specified norm.
8. Install a new gasket and tighten the filler plug.
Tightening torque - 44 Nm