Contents: Checking the oil level ⇊ Oil change ⇊
Checking the oil level
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the filler plug (A) and remove the gasket (B).
3. Make sure that the oil level (C) is level with the lower edge of the filler hole.
If necessary, top up the gearbox oil level to the specified level.
- Oil - MTF
4. Install a new gasket and tighten the filler plug.
- Tightening torque - 44 Nm
Oil change
1. Place the vehicle on a flat, horizontal surface.
2. Unscrew the filler plug (B) and remove the gasket.
3. Unscrew the drain plug (A) and remove the gasket.
4. Drain the oil from the gearbox into a container.
5. Install a new gasket and tighten the drain plug.
- Tightening torque - 39 Nm
6. Fill the gearbox with oil.
- Oil - MTF
Filling capacity:
- when changing oil - 1.6 l
- full volume - 1.7 l
7. Make sure that the gearbox oil level is at the lower edge of the filler hole. If necessary, top up the oil level to the specified norm.
8. Install a new gasket and tighten the filler plug.
- Tightening torque - 44 Nm
Original article on the website: HONDABOOK.ru