Checking the fluid level
- Recommended fluid: Honda Ultra V or Ultra PSF-II power steering fluid.
Fluid replacement
1. Disconnect the return hose from the tank side and install the plug on the tank.
2. Attach a suitable hose to the end of the disconnected hose.
3. Prepare a suitable container.
4. Start the engine and drain the fluid at idle speed, slowly turning the steering wheel left and right until it stops.
5. When liquid stops flowing from the hose, turn off the engine.
6. Connect the return hose to the tank and fill the tank with fresh fluid up to the upper level mark:
- Recommended Fluid: Honda Ultra V or Ultra PSF-II Power Steering Fluid
- Amount of liquid: 1.1 l
Avoid spilling liquid while pouring.
7. Start the engine and wait until the fluid level stops changing.
8. Slowly turn the steering wheel left and right until air stops flowing from the return hose.
9. Recheck the fluid level in the reservoir and top up to the upper level mark.
Do not overfill the liquid.
The original text of the article is located on the website: www.hondabook.ru