Wheel arrangement 4x2
1. Loosen the rear wheel nuts, lift the car and place it on stands. Remove the wheel.
2. Release the brake hoses from the locks on the guide lever.
3. Disconnect the brake hoses from the brake mechanism and plug them (see Chapter 9).
4. Remove the brake drum support disc (see fig. 14.4).
5. If you are removing the right guide arm, disconnect the two control arm mounting nuts and remove both parts of the latter from the stabilizer and the arm guide (see fig. 18.5).
6. Remove the bolt securing the guide arm to the frame and dismantle the arm (see fig. 14.4).
7. Installation is carried out in the reverse order of removal.
Wheel arrangement 4x4
8. The car stands on stands without rear wheels.
9. Remove the upper and/or lower control arm guide fasteners from the housing and axle.
10. Installation is carried out in the reverse order of removal. Tighten the threaded connections with the force specified in specifications.
(The text was taken from the website: hondabook.ru)