Level check
1. Place the car on a level surface.
2. Loosen the gearbox oil level plug with a hex wrench and check the fluid level, which should reach the lower edge of the hole. The level should be at the bottom edge of the hole.
3. Add fluid if necessary.
Change of oil
1. Park the vehicle on level ground.
2. Place a pallet under the gearbox, unscrew the filling and drain plug.
3. Drain the oil.
4. Replace drain plug and tighten to 47 Nm.
5. Fill with oil until it flows out of the filling hole (approx. 1.0 l).
6. Screw on the filler plug and tighten to 47 Nm.