2. From the bottom of the car, unscrew the through bolt and nut and disconnect the lever rod from the control rod.
3. Remove washers, bushings, spacers and rubber rings.
Pic. 4.3 Assembly of the gear lever and linkage system (models 1984 -1987) 1 - lever handle; 2 - anther; 3 - anther cover; 4 - stopper; 5 - ball bearing holder; 6 - ball bearing seat; 7 - rubber ring; 8 • washer A; 9 - rubber bushing; 10 - washer B; 11 - rotary rod; 12 - finger; 13 - latch; 14 - thrust; 15 - bolt; 16 - bracket for fastening the rotary rod; 17 - rubber support of the rotary rod; 18 - spacer; 19 - anther; 20 - bushing; 21 - thrust washers; 22 - spacer; 23 - rubber ring.
4. Unscrew and remove the lever handle.
5. Remove the center console (see chapter 11).
6. Remove anther, a spring stopper and remove the lever.
7. Remove the ball joint seat, ball joint holder, rubber ring and boot.
8. Inspect and replace damaged or worn parts.
9. Installation is made in the return to removal order. Don't forget to fill the spacer with grease and tighten the hinge bolt.