Contents: 1st gear pinion ⇊ 2nd, 3rd, and 4th gears ⇊ 5th gear pinion ⇊ Differential ⇊ Tightening torques for threaded…⇊
1st gear pinion
Axial clearance - 0.03-0.18 mm
The thickness of the adjusting washers is 1.89-1.92 mm
2nd, 3rd, and 4th gears
Axial clearance - 0.05-0.18 mm
Thickness of adjusting rings
- 28.01-28.04 mm
- 28.04-28.07 mm
- 28.07-28.10 mm
- 28.10-28.13 mm
5th gear pinion
Axial clearance - 0.05-0.4 mm
Thickness of the spring ring - 0.5-1.575 mm with a step of 0.025 mm
The gap in the synchronizer fork-clutch pair is 0.45-1.0 mm
Clearance limiting ring-gear - 0.4 mm
Main gear drive pinions (gap) - 0.05-0.15 mm
Adjusting washers - 0.7-1.0 mm with a step of 0.05 mm
Differential
Lateral clearance - 0.1-0.15 mm
The thickness of the adjusting washers is 2.45-2.95 mm with a step of 0.1 mm
Tightening torques for threaded connections, except those specified specifically (Nm)
Intermediate shaft lock nut - 88
Rear cover mounting bolts - 10
Shift Lever Holder Bolts - 10
Bolts for fastening the box to the flywheel housing - 27
Flywheel housing to engine mounting bolts:
- 4-speed gearbox - 45
- 5-speed gearbox - 68
[The text of the article is available on the website «hondabook.ru»]