Manual transmission
Engines B16A2, B16A4, B16A6
Remove the eight flywheel bolts, then separate the flywheel from the crankshaft flange. After installation, tighten the bolts in the sequence shown.
Except for engines B16A2, 516A4, B16A6
Remove the six flywheel bolts, then separate the flywheel from the crankshaft flange. Once installed, tighten the bolts in a diagonal sequence.
Automatic transmission
Engine B16A5
Remove the eight drive plate bolts, then separate the drive plate from the crankshaft flange. After installation, tighten the bolts in the sequence shown.
Except for the B16A5 engine
Remove the six drive plate bolts, then separate the drive plate from the crankshaft flange. After installation, tighten the bolts in a diagonal sequence.
