Withdrawal
1. Remove transmission.
2. Remove mounting bolts and flywheel.
3. The back cover can be removed (only for manual transmission).
For installation:
All major rotating parts, including the flywheel/drive plate, are individually balanced to zero. Balancing for the engine, as well as balancing weights for a new flywheel, are not required.
1. Install the rear cover, if removed.
2. Place the flywheel on the crankshaft and install the bolts. Tighten the bolts to the required torque in a criss-cross pattern. For all mechanical boxes, the bolts are tightened to 105 Nm. For all automatics - up to 75 Nm.