Inspection
1. Release the parking brake.
Note: If the parking brake is engaged, you may get incorrect measurement data.
2. Check the rear wheel toe-in angle.
Rear wheel toe angle
- If adjustment is required, follow step 3.
- If adjustment is not required, remove the equipment.
Adjustment
3. Before starting the adjustment, note the location of the flange bolts on the right and left compensator arms.
4. Loosen the flange bolts and move the compensator lever in and out as indicated to adjust the toe angle.
5. Tighten the flange bolt
Example.
After checking the rear wheel alignment, the wheel is 2mm out of specification, move the lever so that the adjusting bolt moves 2mm inward from the position you occupy before adjustment. The distance the adjusting bolt moves should correspond to the distance exceeding the specification.
[The text was taken from the website: HondaBook]