Attention:
- Replace the self-locking nuts after removal.
- The vehicle should be lowered to the ground before tightening the bolts and raeitj associated with the rubber mounts and bushings.
Note:
- Remove any dirt, oil or grease from the threaded portion before tightening fasteners,
- The right and left shock forks are not interchangeable. The left shock fork is marked JL or AL, and the right fork is marked JR or AR.
- The right and left upper control arms are not interchangeable. The left upper control arm is marked SO4-L, the right upper control arm is marked SO4-R.
- Before tightening the upper and lower mounting nuts on the stabilizer rod, adjust the position of the rod with the suspension under the vehicle load.
- Install washers with the FR marking facing the front of the vehicle.
- After installing the suspension arm, check the position of the front wheels and adjust if necessary.
(Article source on the website: hondabook.ru)