2. Remove the distributor cap and rotor (see chapter 1).
3. Using non-magnetic feelers, check the equality of the air gap between the stator and the magnetic resistance for all protrusions (see fig. 11.3a and 11.3b).
- A) If your machine is equipped with a HITACHI distributor and the gaps are not equal, loosen the screws and move the stator until the gaps are equal. Tighten the screws and check the clearances again.
- b) If your machine is equipped with a TOYO DENSO distributor and the gaps are not equal, check for damage to the stator and magnetic resistance. Damaged parts require replacement.