Removal/installing fuel filter (N22A) (Honda Civic 8)

1. Remove the air cleaner housing.

2. Disconnect connectors A.

3. Disconnect hoses B.

4. Remove the fuel filter cover C.

5. Fix the fuel filter A in a vice. Insert the fuel filter wrench.

6. Remove the water level indicator from the fuel filter.

7. Remove the fuel filter.

8. Install the parts in the reverse order of removal, using a new O-ring B.

9. Bleed the fuel system.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This information has been verified: Yaroslav Shiryaev

◀ Previous

Civic 8: Injection system (diesel)

Next ▶

Water bleeding of fuel filter (N22A)
Checking the suction pipe and fuel vent line (N22A)
Bleeding the fuel system (N22A)
Diesel engine fuel supply system
Catalytic converter (N22A)

Checking the fuel level indicator sending device (N22A)
Replacing the fuel level indicator sending unit (N22A)
Checking the water level sensor in the fuel filter (N22A)
Replacing the water level sensor in the fuel filter (N22A)
Replacing the fuel pump (N22A)