2. Raise the center console and remove the parking brake lever A.
3. Remove access panel A from the floor.
4. Disconnect connector B from the fuel tank.
5. Disconnect the quick disconnect pipe connections C from the fuel pump/fuel gauge assembly.
6. Using the special tool, loosen the fixed nut A of the fuel tank block assembly.
7. Remove the fastened nut A and the fuel tank block assembly.
8. Replace the transmission unit of the fuel gauge B.
9. Install the fuel gauge transmitter unit in the reverse order of removal with a new base gasket C and a new mounting nut, then check the following:
- when connecting the wiring harness, make sure the connection is secure and connector D is securely locked;
- When installing the transmitter unit of the fuel level gauge, make sure that the connection is secure and the connector is securely locked. Be careful not to bend or twist it too much;
- When installing the fuel gauge assembly, align the marks on the fuel tank E and on the fuel tank assembly F.