1. Raise the vehicle and place safety supports in appropriate places.
2. Remove the wheels.
3. Install suitable flat washers A and wheel nuts. Tighten the nuts to the specified torque to securely fasten the brake disc to the hub.
4. Mount the micrometer tool on the hub flange or cap as shown in the illustration and measure the bearing clearance by moving the brake disc back and forth.
Bearing play runout standard:
- Front/rear: 0-0.05 mm.
5. If the bearing play exceeds the normal value, replace the wheel or hub bearing.
The original is located on the website: hondabook