Checking the Parking Brake Switch (Honda Civic 8)

1. Remove the rear center console.

2. Disconnect connector A from parking brake sensor B.



3. Measure the electrical resistance between the positive terminal C and ground.

When the parking brake lever is pulled, the electrical circuit must be closed.

When the parking brake lever is fully released, the electrical circuit should be open.

Note: If the ABS or VSA indicator and the brake system indicator come on at the same time, check the ABS or VSA first: ABS, VSA.

If the parking brake/brake fluid level sensors are OK and the brake system indicator does not work, check the ABS or VSA: ABS, VSA.

4. Reinstall the rear center console.

(Information obtained from this source «www.HondaBook.ru»)