1. Inspect the brake hoses and make sure there is no mechanical damage, signs of wear, or brake fluid leakage; they should not touch other parts and should not be twisted.
2. Inspect the brake lines and make sure there is no mechanical damage, corrosion or brake fluid leakage. The brake lines should also not be bent.
3. Make sure that the hose and pipe connections are not leaking and tighten the connections if necessary.
4. Check and ensure that there are no signs of mechanical damage to the master brake cylinder and no signs of leakage of brake fluid from the ABS or VSA modulator.
(Refer to the original source on the website HONDABOOK.ru)