Back seat (Honda Civic 7)

1. When removing the rear seat, refer to the assembly drawing "Rear seat".

2. Installation is carried out in the reverse order of removal.

Rear seat (sedan). 1 - bolt (models with armrest), 2, 4 - clamp, 3 - rear seat back, 5 - holder, 6, 7 - lock, 8 - rear seat cushion, 9 - seat belt buckle, 10 - central seat belt, 11 - holder, 12 - lock, 13 - seat belt buckle, 14 - central seat belt buckle.

Rear seat (hatchback). 1 - bushing, 2 - rear seat back, 3 - cover, 4 - bracket, 5 - bushing, 6 - rear seat back, 7 - bushing, 8 - holder, 9 - rear seat cushion, 10 - retainer.

Removal and installation the rear seat armrest

Sedan

1. Remove the rear seat back.

2. Loosen the screws, disconnect the clamps and remove the cover.

3. Loosen the bolts and remove the armrest.

Tightening torque - 10 Nm

4. Detach the cup holder.

5. Installation is carried out in the reverse order of removal.

Hatchback

1. Remove the armrest.

a) Pull the cover and remove it.

b) Unscrew the bolt, remove the seals, then unscrew the fixing bolt.

Tightening torque - 10 Nm

c) Remove the armrest and bushings.