Front seats (Honda Civic 7)

1. (Some models) Before carrying out any work, make sure that you know the access code for the radio. After disconnecting the battery terminal, the radio is blocked and can only be unlocked by entering the code.

2. Disconnect the cable from the negative battery terminal and wait at least 3 minutes.

3. Remove the covers from the mounting bolts.





4. Loosen the seat mounting bolts.

Tightening torque - 34 Nm



5. Raise the seat, disconnect the retainer and connectors, the location of which is shown in the figure.







6. Carefully remove the seat and pull it out of the passenger compartment through the open front door.

7. Installation is carried out in the reverse order of removal.

Removal and installation the front seat armrest (hatchback)

1. Disconnect the pins and remove the front cover. Then disconnect the retainer and remove the back cover.



3. Unscrew the nut, remove the seals and the front seat armrest. Remove the bushings if necessary.





4. Loosen the bolts and then remove the armrest mounting bracket.

Tightening torque: 22 Nm



5. Installation is carried out in the reverse order of removal.