Interior (internal body elements) of the car Honda Accord 6

Caring for Vinyl Trim Elements
Do not use detergents, caustic soda, or petroleum-based cleaners when cleaning vinyl panels. A warm solution of soap and water is perfect for this purpose. Stubborn dirt can be easily removed with a soft brush (with...

Caring for upholstery and carpeting
Every three months, remove the carpets and mats and clean the interior trim panels. If necessary, this procedure can be performed more often. To remove debris, as well as to clean the carpets and mats, you can use a...

Removal and installation interior door trim panels
Caution: Wear gloves to protect your hands from cuts when performing procedures through access holes in the door frame. Removal 1. On models with manual windows, remove the window up/down handle. 2. Remove the door lock...

Removal and installation window regulators
Caution: Wear gloves to protect your hands from cuts when performing procedures through access holes in the door frame. Front doors 1. Remove the door interior trim panel and moisture protection shield (see Section...

Removal and installation the center console
Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to...

Removal and installation trim sections of the instrument panel
Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to...

Removal and installation the steering column cover
Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to...

Removal and installation the main section of the instrument panel
Warning! The models of vehicles covered in this manual are equipped with a supplemental restraint system (SRS). Before performing any work near the air bag unit, steering column or instrument panel, turn off the SRS to...

Removal and installation seats
Front seats 1. Access to the front and rear mounting bolts is gained by moving the seat to the extreme positions. 2. Remove the decorative covers and loosen the seat mounting bolts. 3. Raise the seat and disconnect all...

Removal and installation the rear shelf
1. Fold the rear seatback forward. Pull back the corners of the seat cushion to gain access to the bolts securing the side seatback trim panels. Remove the panels. 2. Release the clamps and carefully lift and remove the...