Contents: Sedan ⇊ Hatchback ⇊
Sedan
1. Turn the ignition switch to the "ON" position
2. Set the minimum temperature (18°C).
3. Turn the ignition switch to the "OFF" position.
4. Connect the heater valve cable (B) to the rod (A). Install the cable on the limiter (C) and secure with the clamp (D).
5. Move the valve lever (C) to the fully closed position as shown in the figure. Connect the cable (B) to the lever (C). Pull the cable slightly and secure it with the clamp (A).
Hatchback
1. (Manual air conditioner) Set the temperature control to the "MAX COOL" position.
2. (Automatic air conditioning) Turn the ignition switch to the "ON" position, set the minimum temperature and turn the ignition switch to the "OFF" position.
3. Connect the heater valve cable (B) to the rod (C). Install the cable on the limiter (D) and secure with the clamp (A).
4. Move the valve lever (A) to the fully closed position as shown in the figure. Connect the cable (B) to the lever (C). Pull the cable slightly and secure it with the clamp (A).
