2. Remove shields B.
3. Remove the bolts and the top of the control panel A.
4. Disconnect the 5P connector from the wiper motor B, then remove the seven bolts and rods C.
5. Make sure that mark A on lever B is aligned with mark C on wiper rod D.
6. Unscrew nut E and remove the wiper arm and rod.
7. Remove the three bolts and wiper link from motor F.
8. Perform installation operations in reverse order to removal operations, observing the following.
Align the marks on the lever and rod.
Apply general purpose grease to all moving parts.
Before installing the wiper arms, turn the wiper on and off to return the wiper shafts to the resting position.
Replace any damaged fasteners if necessary.
9. After installation, adjust the windshield wipers.