Note: Check the tightness of the connection with the body, then check whether the distances between the front, rear and lower edges of the doors and the body are the same. Check whether the edges of the doors and the body are parallel. Replace the mounting bolts before adjusting.
1. Before adjusting the doors, place the vehicle on a firm, level surface.
2. Adjust loops A.
Place technical napkins C on the floor jack B. Use the jack to avoid damaging the door during adjustment.
On the front door: remove the front plastic wheel arch liners. Slightly loosen the bonnet hinge mounting bolts D and move the door forward or backward to match the gaps.
On the rear door: loosen the hood mounting bolts E slightly and move the door forward or backward to match the gaps.
3. If necessary, replace the door mounting bolts with special adjustment bolts (P/N 90102-SFA-305), then adjust the door. Slightly loosen the door mounting bolts F and move the door up or down to equalize the gaps, and forward or backward to achieve a tight connection with the body.
4. Check whether the edges of the doors and the body are parallel. If necessary, adjust the door cushions A so that the back of the door is aligned with the body.
5. Apply automotive paint to the hinge mounting bolts and around the hinges.
 |
 |
6. Check for water leaks.