General information
This Chapter Gearshift box is dedicated to 4-speed and continuously variable automatic transmissions (AT and CVT). Civic models use 4-speed AT of three types: A4RA, B4RQ and A4RA, as well as continuously variable CVT type M4VA. Integra models are equipped with 4-speed AT types MP7A, S4XA and SP7A. Information on manual gearboxes (RCPP) is given in 5-speed manual transmission.
The placement of the AT/CVT and its associated components in the engine compartment of the vehicle is shown in the accompanying illustration below.
Due to the complexity of the AT and CVT designs, the lack of commercially available replacement internal components, and the need to use special equipment, the authors of this Guide do not recommend that vehicle owners perform major transmission repairs on their own.
Sometimes, in the case of a serious breakdown, it is more reasonable to replace the transmission than to spend time and money on restoring the failed one. Regardless of the chosen method of putting the failed gearbox into operation, performing its removal and installation yourself will help to significantly reduce costs.
In view of the above, this Section only covers the procedures for removing and installing the AT/CVT.
Location of AT/CVT and its associated components in the engine compartment of the vehicle
1 - Transmission; 2 - Gear shift cable; 3 - Drive shaft; 4 - Transmission Cooling Lines
Original article on the website HondaBook.ru