2. Disconnect the fuel level sensor (fuel level meter transmitting unit) And from the fuel pump/fuel level meter unit B.
3. Check the following points before installing the fuel pump/fuel level gauge assembly:
- when connecting the wiring harness, make sure the connection is secure and the C connectors are firmly seated;
- when installing the fuel level meter sending unit, make sure the connection is secure and the connector is firmly locked. Be careful not to bend or twist it too much.
4. Install the fuel filter in the reverse order. When installing the fuel pump/fuel level gauge assembly, align the marks on the assembly with those on the fuel tank.
[The text of the article is available on the website: www.hondabook.ru]