2. Remove the battery.
3. Drain the engine coolant.
4. Remove the front grille.
5. Remove the front grille.
6. Disconnect the fan motor connectors A and the hood lock switch connector B, then remove the clamps C.
7. Remove the upper radiator hose A and the lower radiator hose B.
8. Remove the lower engine cover.
9. Disconnect the 2 coolant temperature sensor (ECT) connectors A, then remove the clamps B.
10. Remove the working fluid reservoir.
11. Remove the upper radiator bracket mounting bolts A, then remove frame B.
 |
 |
12. Pull the radiator up, then disconnect the fan shroud assembly and other parts from the radiator.
13. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are securely fastened.
14. Install the radiator by performing the operations in reverse order. Apply paint to the strut mounting bolts.
15. Fill the radiator with coolant and bleed air from the cooling system.