Note: Do not scratch or damage the steering column covers.
Do not use tools to lift the covers.
1. Release the steering wheel adjustment lever A and set the steering column to its highest position by moving it away from you all the way.
2. Insert a suitable size screwdriver or similar tool B along guide C into pin hole D located in the lower steering column cover E.
3. Unhook the hook F located on the left side of the upper steering column cover G.
Note: The right hook H of the upper casing cannot be released from the inside.
4. Turn the steering wheel to the left and release the pawl on the left side I of the upper steering column cover by pulling the lower cover from the front.
5. Turn the steering wheel to the right and release the pawl on the right side J of the upper steering column cover by pulling the lower cover from the front.
6. Remove the casing by pulling it up slightly and unhooking the right hook H of the upper column casing.
Note: Carefully remove the pawls; remember that the K hooks may break if the upper steering column cover is pulled too sharply.
7. Remove the three screws and remove the lower steering column cover A.
8. Install the upper and lower steering column covers in the reverse order of removal, making sure to secure the hooks.
9. Install the driver's side instrument panel lower cover.