Note: Do not scratch the body.
1. Remove the front belt.
2. Remove the front wheel arch protector.
3. Remove the front plastic mudguards A.
Remove the retainer B securing the engine cover C and the front mudguard liner.
From the wheel arch side, remove the D clamps securing the front mudguard liner (and the engine cover) to the body.
Unhook hook E from the engine cover, then remove the front fender liner.
4. Install the front mudguard in reverse order. Please note the following:
Check the clamps for damage or whitening from stress and replace them with new ones if necessary.
Fasten the fasteners securely into place.
The original text of the article is located on the website HONDABOOK