Checking wheel alignment
1. Place the vehicle on the stand.
2. Unscrew the wheel hub mounting nut.
3. Install the special device.
4. Measure the wheel alignment.
If the camber does not correspond to the established norm, check the suspension elements for damage and bending. If necessary, replace the faulty element.
5. Remove the special device.
6. Tighten the new wheel hub nut.
7. Measure the wheel alignment.
If the camber does not correspond to the established norm, check the suspension elements for damage and bending. If necessary, replace the faulty element.
8. Remove the special device.
9. Tighten the new wheel hub nut.
Checking and adjusting the alignment
1. Release the parking brake lever.
2. Measure the toe-in value.
3. Adjust the rear wheel alignment.
a) Loosen the toe adjustment eccentric bolt.
b) Rotate the toe-in adjustment eccentric to adjust the toe-in of the rear wheels.
c) Tighten the bolts.
Tightening torque - 59 Nm