Note: To perform checks, it is necessary to remove the retainer (A) using a slotted screwdriver (B).
Driver and front passenger airbag connectors
1. While holding the connector (A), slide the lock (B) until it stops (C) and disconnect the connector.
2. Press the latch (A) and connect the connector without touching the lock (B). Make sure that the lock presses the latch.
3. Slide the lock (B) until it stops.
Side airbag connectors
1. While holding the connector (A), slide the lock (B) and the retainer (C) and disconnect the connector.
2. Connect the connector and slide the lock until it clicks.
[The article was taken from the website: www.hondabook.ru]