Note: Installation is carried out in the reverse order of removal.
Note: Before carrying out work, read the chapter "Supplementary Restraint System (SRS)".
1. Disconnect the cable from the negative battery terminal and wait at least 3 minutes.
2. Remove the covers from the mounting bolts.
Front outer mount.
Front inner mount.
Rear external mount.
Rear internal mount.
3. Loosen the bolts (B) securing the seat (A).
- Tightening torque - 34 Nm
4. Disconnect the clips (A) and connectors (B, C, D and E) as shown in the figure.
From the driver's side.
From the passenger side.
5. Remove the headrest.
6. Carefully remove the seat and pull it out of the passenger compartment through the open front door.
(Article source on the website HondaBook.ru)