Checking the condition and replacing the windshield wipers (every 12,000 km or every 6 months) (Honda Civic 6)

1. The condition of the windshield wiper assemblies should be checked regularly in accordance with the vehicle's routine maintenance schedule (see Schedule of current maintenance). The brushes are inspected for mechanical damage, signs of loosening of the component fastenings and wear of the rubber working elements.

2. Over time, road film accumulates on the working surfaces of the brushes, which leads to a noticeable decrease in the efficiency of the windshield wipers. Regularly wash the brushes with a medium-concentration cleaning solution.

3. During the operation of the windshield wipers, the fasteners may gradually loosen spontaneously; the reliability of their tightening should also be checked regularly.

4. If cracks or signs of wear on the rubber working elements are detected, the brushes are replaced.

5. Move the wiper arm away from the glass.



6. Press the locking tab inward and carefully remove the brush from the hook at the end of the lever (see accompanying illustration).



7. If it is necessary to replace the working element of the brush, press the locking tabs on the end of the brush firmly, then grasp the element and, pulling it, remove it from the frame (see accompanying illustration).





8. Remove the metal holders from the rubber working element and insert them into the grooves of the new element (see accompanying illustration).

9. Insert the element into the frame, making sure that the locking tabs snap securely into place.

10. Place the blade on the wiper arm and insert it into the hook, making sure the locking tab snaps into place securely.

(The text was taken from the website: «www.HondaBook.ru»)