2. Over time, road film accumulates on the working surfaces of the brushes, which leads to a noticeable decrease in the efficiency of the windshield wipers. Regularly wash the brushes with a medium-concentration cleaning solution.
3. During the operation of the windshield wipers, the fasteners may gradually loosen spontaneously; the reliability of their fit and tightening should also be checked regularly.
4. If cracks or signs of wear on the rubber working elements are detected, the brushes are replaced.
5. Move the wiper arm away from the glass.
6. Press the locking tab inward and carefully remove the brush from the hook at the end of the lever.
7. If you need to replace the wiper blade, squeeze the locking tabs on the end of the blade tightly, then grasp the blade and pull it out of the metal frame.
8. Remove the metal holders from the rubber working element and insert them into the grooves of the new element.
9. Insert the element into the frame, making sure that the locking tabs snap securely into place.
10. Place the blade on the wiper arm and insert it into the hook, making sure the locking tab snaps into place securely.
(Full version on the source website: Hondabook.ru)