Caution: Use only genuine Genuine Honda Power Steering Fluid-V. Using other fluids will damage the system.
System capacity: 0.85 liters when disassembled
Filling tank capacity: 0.4 liters
1. Lift the fill drum, then disconnect the return pipe.
2. Connect a pipe of the appropriate diameter to the disconnected return pipe and insert the tip of the pipe into the appropriate container.
Attention. Be careful not to spill liquid on the housing or other parts. Wipe up any spilled liquid immediately.
3. Start the engine, let it idle, and turn the steering wheel from lock to lock several times. When the fluid stops flowing from the hose, turn off the engine. Pour out the liquid.
4. Reconnect the return hose to the filling drum.
5. Fill the filling barrel to the top level.
6. Start the engine, let it idle at high speed, then turn the steering from lock to lock several times to bleed air from the system.
7. Check the fluid level again and add if necessary.
Attention. Do not fill the filling barrel above the top level.