2. Unscrew the filler plug, remove the washer, check the fluid condition and make sure that the fluid level is normal.
3. If the transmission fluid is dirty, remove the drain plug and drain the fluid.
4. Replace the drain plug with a new washer and fill with transmission fluid to the correct level.
Oil capacity
MCP model SEVM
- 1.8 liters at fluid change
- 2.0 l when repairing
MCP model SEPM
- 1.65 liters at fluid change
- 2.1 l when repaired
Always use Genuine Honda Manual Transmission Fluid (MTF). If it is not available, API service SG, SH or SJ engine oil with a viscosity of SAE 10 W-3O or 10 W-40 can be used temporarily.
5. Replace the filler plug with a new washer.