Adjustment
LHD type:
1. Disconnect the heater valve cable from the valve lever and clamp and from the heater control lever and clamp.
2. Set the temperature control lever to MAX. COOL
3. Turn the heater control lever as shown, then connect the end of the heater valve cable to the heater control lever.
4. Gently push the heater valve cable housing back from the end so that the slack in the heater valve cable is removed but the temperature control lever does not move. Secure the end of the heater valve cable housing to the stopper, then clip the heater valve cable into place.
5. Turn the heater valve lever as shown, then connect the end of the heater valve cable to the heater valve lever.
6. Gently push the heater valve cable housing back from the end so that the slack in the heater valve cable is removed but the temperature control lever does not move. Secure the end of the heater valve cable housing to the stopper. Then, clip the heater valve cable into place with the clamp.
Note: Whenever you disconnect the heating valve cable, always adjust the air flow control cable.
RHD Type:
1. Disconnect the heater valve cable from the heater valve lever and clamp, and from the heater control lever and clamp.
2. Set the temperature control lever to MAX. HOT.
3. Turn the heater control lever as shown, then connect the end of the heater valve cable to the heater control lever.
4. Gently push the heater valve cable housing back from the end so that the slack in the heater valve cable is removed but the temperature control lever does not move. Secure the end of the heater valve cable housing to the stopper. Then, clip the heater valve cable into place with the clamp.
5. Turn the heater valve lever as shown and then connect the end of the heater valve cable to the heater valve lever.
6. Gently push the heater valve cable housing back from the end so that the slack in the heater valve cable is removed, but be careful not to move the temperature control lever. Secure the end of the heater valve cable housing to the stopper, then clip the heater valve cable into place.
Note: Whenever you disconnect the heating valve cable, always adjust the air flow control cable
[Refer to the original source on the website www.hondabook.ru]