Civic 3 and 4 (1983-1991) Civic 5 and 6 (1991-2000) Civic 6 (1995-2000) Civic 7 (2000-2005) Civic 8 (2005-2011)

Checking the oil level in a manual transmission (Honda Civic 3)

0

1. Work is carried out under the vehicle.

2. Unscrew the filler plug. The correct oil level is under the filler hole edge.

Fig. 22.1 Drain (1) and filler (2) plugs of a…

Fig. 22.1 Drain (1) and filler (2) plugs of a manual gearbox

3. Add oil with a syringe until oil starts to flow out. Install the plug and tighten it to the recommended torque.

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This information has been verified: Yaroslav Shiryaev

◀ Previous

Civic 3 and 4: Maintenance

Next ▶

Fuel system control
Valve Drive Clearances — Checking and Adjusting
High voltage wires, distributor cap and rotor
Spark plugs — inspection and replacement
Air filter and crankcase ventilation filter

Checking the oil level in the rear differential (4WD models)
Steering and suspension control
Checking the drive shaft dust boots
Air damper position control
Checking and replacing crankcase ventilation

Link in different formats to this article

TEXTHTMLBB Code

Comments and feedback from visitors

No comments yet

Civic 8 (2005-2011)

Civic 7 (2000-2005)

This website uses cookies to ensure proper functioning. By clicking "OK," you agree.