General information
Clearance between pushrod and master cylinder (at 20 mm Hg vacuum in the amplifier) — 0.0-0.4 mm
Disc brakes
Minimum pad thickness - see Chapter 1
Minimum disc thickness - stamped on the disc
Disc runout - no more than 0.100 mm
Non-parallelism of the disk surface - no more than 0.015 mm
Drum brakes
Minimum pad thickness - see Chapter 1
Drum diameter (maximum) - stamped on the drum
Tightening torques for threaded connections (Nm)
General information
Brake Hose Bolt - 33
Master cylinder mounting nut:
- from 1984 to 1987 - 6
- since 1988 - 13
Brake booster mounting nut - 12
Front disc brakes
Brake caliper guides
from 1984 to 1987. (all models):
- top bolt - 19
- bottom bolt - 17
since 1988. (Civic, CRX Std, CRX Si, Shuttle):
- top bolt - 54
- bottom bolt - 45
CRX HF — 32
4WD Shuttle — 49
since 1989 (Civic. CRX DX and Shuttle):
- top bolt - 34
- bottom bolt - 27
Civic EX — 32
CRX HF — 23
CRX Si and 4WD Shuttle - 49
Caliper Bracket Mounting Bolts:
- from 1984 to 1987 - 78
- since 1988 - 72
Rear disc brakes
Caliper mounting bolts - 21
Bracket mounting bolts - 38
Rear drum brakes
Wheel Cylinder Nuts - 7
Drum support disc
nuts (from 1984 to 1987.):
- 2WD — 45
- 4WD — 40
bolts:
- from 1988 to 1989 - 38
- since 1989 - 64
(The article is based on information from the website HondaBook.ru)