| Type | Hydraulic, with vacuum booster |
| Front brake mechanisms | Disc, ventilated |
| Rear brakes | Disc or drum |
| Parking brake | With mechanical drive |
| Foot brake pedal | |
| Free travel, mm | 1.6÷4.8 |
| Height, mm | |
| Models with manual transmission | 165.1 |
| Models with AT | 168.3 |
| Parking brake lever travel, mm | |
| Disc brakes | 152÷229 |
| Drum brakes | 102÷178 |
| Clearance between the vacuum booster pusher and the master cylinder piston (at a vacuum depth of 508 mm Hg on the booster), mm | 0.0÷0.5 |
| Disc brakes | |
| Minimum permissible thickness of brake pads | See Chapter Settings and ongoing maintenance |
| Minimum permissible disc thickness | See markings on the disc |
| Maximum permissible value of disc thickness differences (parallelism), mm | 0.015 |
| Maximum allowable disc runout, mm | 0.102 |
| Drum brakes | |
| Minimum permissible thickness of brake shoe friction linings | See Chapter Settings and ongoing maintenance |
| Maximum permissible internal diameter of the drum | See markings on drum |
| Tightening forces of threaded connections | Nm |
| Fasteners for common brake system components | |
| Hollow bolt of the union nut for connecting the brake hose to the brake caliper (front or rear) | 34 |
| Master cylinder mounting nuts | 14.9 |
| Front suspension strut spacer rod mounting nuts | 22 |
| Brake booster servo mounting nuts | 12.4 |
| Wheel sensor mounting bolts | 9.9 |
| Disc brakes on the front wheels | |
| Caliper mounting bolts | |
| 4-cylinder models | 73 |
| V6 Models | 49 |
| Bolts for fastening the caliper anchor bracket | 108 |
| Rear wheel disc brakes | |
| Caliper mounting bolts | 26 |
| Bolts for fastening the caliper anchor bracket | 38 |
| Disc to hub mounting screws | 9.5 |
| Rear wheel drum brakes | |
| Wheel cylinder fastening nuts | 9.0 |
(Full text available on the portal: «HondaBook.ru»)
