Remove the towing eye, wheel wrench and flathead screwdriver from the tool bag. The tool is stored in the luggage compartment on the left side.
Press your finger on the bottom of the cover, which is located on the bumper. Remove the cover.
Screw the towing eye into the threaded hole behind the removed cover. Tighten the eye firmly with the wheel wrench.
Lifting the vehicle or towing it with a hitch attached to the bumper may cause the vehicle to malfunction. The bumper cannot support the weight of the vehicle.
If the clutch is slipped for a long time when trying to remove a stuck vehicle, it may overheat, resulting in damage to the transmission. The best way to remove a stuck car is to call a technical assistance service.
Attention! To prevent damage to the vehicle when towing it by the front eye, the road surface must be level. Do not tow the vehicle if the hitch must be at an angle to the longitudinal axis of the vehicle. Please note that the towing eye is not intended for towing the vehicle on public roads.