Contents: Electrically adjustable rear view…⇊ Heated rear view mirrors ⇊ Folding the outside rearview mirrors…⇊
Electrically adjustable rear view mirrors

1. Turn on the ignition by turning the key in the ignition switch to the "ON" (II) position.
2. Move the switch to the left (L) or right (R) to adjust the left or right mirror respectively.
3. Press the upper, lower, left or right edge of the key to adjust the selected outside mirror (left or right). In this case, the mirror will rotate relative to the horizontal and vertical axes in the appropriate direction.
4. After finishing adjusting both mirrors, move the switch to the middle position, in which the adjustment button does not work. This is necessary so that if the button is accidentally pressed, the set adjustment of the outside rear-view mirrors is not disturbed.
Heated rear view mirrors

The car is equipped with electric heaters for the outside rear-view mirrors, which help remove a thin layer of ice or water film from the mirrors. Electric heating of the mirrors is switched on by the rear window heating switch when the ignition key is in the "ON" (II) position. At the same time, the indicator lamp built into the switch button switches on. Pressing the button again switches off the heater.
Folding the outside rearview mirrors (for some vehicle versions)

For easy parking in tight spaces, you can fold the outside rear-view mirrors. The mirror folding is controlled by a switch located next to the rear-view mirror selection switch. Before driving, check that the outside mirrors are returned to the working position. The electric drive for folding the outside mirrors only works when the ignition is on (the key is turned to the "ON" (II) position of the ignition switch). Press the button to fold both rear-view mirrors simultaneously. To return the mirrors to the working position, press the same button again.
Warning: Never drive with the rear view mirrors folded.
The text of the article is available on the website www.hondabook.ru
