Warning! The bulbs of halogen lamps are filled with pressurized gas and may explode if shaken violently. Try to take such lamps only by the base and use safety glasses. Remember that when touching the bulb with bare fingers, grease stains remain on the glass, which leads to premature failure of the lamp as a result of overheating. Before installation, wipe the lamp bulb with alcohol.
1. Open the hood.
2. Disconnect the electrical connector located under the headlight assembly, then remove the rubber protective cover (see accompanying illustration).
3a. On Civic models, release the bulb socket retainer wire (see accompanying illustration).
3b. Pull out the cartridge from the headlight.
4. On Integra models, turn the socket counterclockwise and remove it from the headlight together with the lamp (see accompanying illustration).
5. Install in reverse order (see warning at the beginning of Section).