1. Remove the door trim panel and water shield (see Removal and installation of an internal upholstery of doors).
2. Fully lower the window.
3. Gently prying, remove the seal from the window opening.
4. Remove the bolt (s) and disconnect the glass guide channel from the door (see accompanying illustration).
5. Raise the glass so that the access of the glass fastening to the regulator lever opens through the holes specially provided in the door frame (see accompanying illustration).
6. Cover with rags the top edge of glass, then give two fixing bolts.
7. Remove the glass from the door assembly through the window opening.
8. Installation is carried out in the reverse order.