Car automatic transmission Honda Accord 3
Transmission Removal and Installation — Accord 1984-89, Prelude 1984-87
Removal 1. Disconnect the cable from the negative terminal of the battery and gearbox. 2. Unlock the steering wheel and shift the transmission to neutral (N). 3. Disconnect the wire from the positive terminal of the...
Removal 1. Disconnect the cable from the negative terminal of the battery and gearbox. 2. Unlock the steering wheel and shift the transmission to neutral (N). 3. Disconnect the wire from the positive terminal of the...
Transmission Removal and Installation — Accord 1990-91
Removal 1. Disconnect the wires from the battery and remove the battery. 2. Raise and securely support the vehicle with stands. 3. Remove the air intake hose, air cleaner box and battery tray. 4. Disconnect the throttle...
Removal 1. Disconnect the wires from the battery and remove the battery. 2. Raise and securely support the vehicle with stands. 3. Remove the air intake hose, air cleaner box and battery tray. 4. Disconnect the throttle...
Transmission Removal and Installation — Prelude 1988-91
Removal 1. Disconnect the negative cable from the battery and transmission. 2. Drain the transmission fluid and replace the drain plug. 3. Disconnect the wiring from the starter, locking solenoids, shift solenoids and...
Removal 1. Disconnect the negative cable from the battery and transmission. 2. Drain the transmission fluid and replace the drain plug. 3. Disconnect the wiring from the starter, locking solenoids, shift solenoids and...
Adjusting the shift cable
1. Start the engine, Shift the gearbox to R, checking that reverse gear is engaged. 2. Stop the engine and disconnect the cable from the negative terminal of the battery. 3. Remove the console. 4. On 1984-88 Accord...
1. Start the engine, Shift the gearbox to R, checking that reverse gear is engaged. 2. Stop the engine and disconnect the cable from the negative terminal of the battery. 3. Remove the console. 4. On 1984-88 Accord...
Throttle Control Cable Fastener (Carburetor)
1. Disconnect the cable from the negative terminal of the battery. 2. Disconnect the throttle control cable from the throttle control lever. 3. Bend down the retaining clips of the retaining plate and unscrew the two 6...
1. Disconnect the cable from the negative terminal of the battery. 2. Disconnect the throttle control cable from the throttle control lever. 3. Bend down the retaining clips of the retaining plate and unscrew the two 6...
Throttle Control Cable (1984-88, Carburetor)
1. Start the engine and let it warm up to operating temperature. Wait until the cooling fan turns on at least once. 2. Check that the throttle cable free play and idle speed are normal and that the automatic throttle...
1. Start the engine and let it warm up to operating temperature. Wait until the cooling fan turns on at least once. 2. Check that the throttle cable free play and idle speed are normal and that the automatic throttle...
Throttle Control Cable (1989-91, Carburetor)
1. Start the engine and let it warm up to operating temperature. Wait until the cooling fan turns on at least once. 2. Check that the throttle cable free play and idle speed are normal. 3. Check the distance between the...
1. Start the engine and let it warm up to operating temperature. Wait until the cooling fan turns on at least once. 2. Check that the throttle cable free play and idle speed are normal. 3. Check the distance between the...
Throttle Control Cable (1985-88, Injection)
1. Loosen the locknuts on the throttle control cable. 2. Press the throttle control lever all the way down. 3. While holding the lever down, pull the throttle cable to check the amount of free play in the cable. 4....
1. Loosen the locknuts on the throttle control cable. 2. Press the throttle control lever all the way down. 3. While holding the lever down, pull the throttle cable to check the amount of free play in the cable. 4....
Throttle Control Cable (1989-91, Injection)
1. Start the engine and let it warm up to operating temperature. Wait until the cooling fan turns on at least once. 2. Check that the throttle cable free play and idle speed are normal. 3. If the car is equipped with an...
1. Start the engine and let it warm up to operating temperature. Wait until the cooling fan turns on at least once. 2. Check that the throttle cable free play and idle speed are normal. 3. If the car is equipped with an...
Reverse light switch
On vehicles with an automatic transmission, the reverse light and neutral switch functions are operated by a single switch located at the base of the selector knob. This multi-channel switch also sends signals to...
On vehicles with an automatic transmission, the reverse light and neutral switch functions are operated by a single switch located at the base of the selector knob. This multi-channel switch also sends signals to...
Tightening torques for threaded connections
Automatic transmission Component Moment of the pinch 1984-89 Accord, 1984-87 Prelude Shift cable holder 12 Nm Rear engine mount on the gearbox housing 39 Nm Front gearbox mounting bolts 39 Nm Torque converter to the...
Automatic transmission Component Moment of the pinch 1984-89 Accord, 1984-87 Prelude Shift cable holder 12 Nm Rear engine mount on the gearbox housing 39 Nm Front gearbox mounting bolts 39 Nm Torque converter to the...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to the guide
- User manual
- Maintenance
- Power unit
- Four-cylinder engines
- Six-cylinder engines
- Engine overhaul
- Cooling system
- Heater and air conditioner
- Power and exhaust systems
- Engine electrical equipment
- Engine management
- Transmission
- Mechanical gearbox
- Automatic gearbox
- Clutch and drive shafts
- Chassis and running gear
- Brake system
- Car suspension
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Electrical circuits
- General information
- Maintenance
- Power unit
- Engine adjustment
- Engine repair
- Engine electrics
- Emission management
- Engine management (carburetor)
- Electronic injection
- Programmable injection
- Schematic of emission system
- Fuel system
- Feedback management
- Transmission
- Manual gearbox
- Automatic gearbox
- Clutch
- Chassis and running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Electrical equipment
- Ventilation and heating
- Air conditioner
- Cruise control system
- Equipment and devices