Contents: Headlight bulbs ⇊ Headlight unit ⇊
1. Disconnect the cable from the negative battery terminal.
Headlight bulbs
Caution: Halogen lamps are pressurized and may explode if the glass bulb is scratched. Wear safety glasses when replacing the lamp.
2. Open the hood.
3. Disconnect the connector at the rear of the headlight assembly.
4. Pry up the spring clip of the lamp lock and turn it counterclockwise. Remove the lamp.
Fig. 8.4 Headlight assembly
5. Installation is carried out in the reverse order of removal
Headlight unit
6. Open the hood.
7. Disconnect the headlight connector.
8. Remove the trim and retaining ring and carefully remove the headlight. Do not touch the headlight adjustment screws.
Fig. 8.8 Assembling the headlight:
1 - spring;
2 - plastic nut;
3 - panel;
4 - holder;
5 - headlight;
6 - retaining ring;
7 - overlay;
8 - vertical adjustment screw;
9 - horizontal adjustment screw.
9. Installation is carried out in the reverse order of removal.